TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Selling Point Introduction
- 1, The instrument is controlled by a large capacity single chipmicrocomputer, and the work is stable and reliable.
- 2, There is a wide range watchdog circuit in the instrument toeliminate the phenomenon of death.
- 3, A variety of operation options, the instrument with astm d1816,astm d877 ,IEC156 three national standard methods and customoperation, can adapt to different users of a variety of choices;
- 4, An instrument using special glass mold for one time, prevent theoccurrence of oil spills and other interference phenomenon;
- 5, The unique high voltage terminal sampling design of theinstrument allows test values to directly enter the A/D converter,avoiding the errors caused by analog circuits, and making the measurement results more accurate.
- 6, The instrument has the functions of over current, overvoltage,shortcircuit and so on, and has very strong anti-interference ability andgood electromagnetic compatibility.
- 7,Portable structure, easy to move, easy to use both inside and outside.
Product Parameter Characteristics
|
Name |
Indicators |
|
Output voltage |
0~80 kV or 0-100kV |
|
THVD |
<1% |
|
Pressure rate |
0.5~5.0 kV/s |
|
Booster capacity |
1.5 kVA |
|
Measurement accuracy |
±2% |
|
Supply voltage |
AC 220 V ±10% |
|
Power frequency |
50 Hz ±2% |
|
Power |
200 w |
|
Applicable temperature |
0~45℃ |
|
Applicable humidity |
<85 % RH |
|
Width * height * depth |
410×390×375 (mm) |
|
Net weight |
~ 32 kg |
Video
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
