TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Product Selling Point Introduction
- 1, The new high speed digital signal processor has high reliability and high reliability;
2, Testing, opening, ignition, alarm, cooling, printing, the whole process of the experiment is completed automatically;
3, Two modes of platinum electric hot wire and gas ignition;
4, Automatic test of atmospheric pressure, automatic correction of test results;
5, Using the newly developed high power high frequency switching power supply, the heating efficiency is high and the adaptive PID control algorithm is adopted to automatically adjust the temperature rise curve;
6, The temperature exceeds the value automatically to stop detection and alarm;
7, The thermosensitive micro printer makes the printing more beautiful and faster, and has the function of offline printing.
8, Time – marked history records, up to 500;
9, The Centennial calendar clock with temperature compensation is accurate, records the date and time automatically, and can run for more than 10 years in the state of power loss;
10, 320 x 240 large screen graphics LCD display screen, Chinese character display interface, rich content;
11, The full screen touch key is used, and the operation is intuitionistic and convenient;
12, Multiple execution standards are built to choose.
Product Parameters
|
Conform to the standard: |
astm d92 GB/T3536 GB/T267 |
|
Display mode: |
High definition color touch screen |
|
Range: |
40~400℃ |
|
Resolving power: |
0.1℃ |
|
Accuracy: |
±2℃ |
|
Repeatability: |
±3℃ |
|
Reproducibility: |
≤5℃ |
|
Ambient temperature: |
5~40℃ |
|
Relative humidity: |
10%~85% |
|
Power Supply: |
AC220V±10% 50Hz±5% |
|
Power: |
550W |
Video
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
