English
- (1)Automatically controlling of test process. 10” touch LCD for display of temperature, volume and curves during the whole process.
(2) Level tracking system consists of American Haydon high-stepping linear motor, imported integral linear ball screw circumferential positioning laser tracker (Japan KEYENCE). The cooling tube and cylinder room are refrigerated mechanically; imported Danfoss (Secop) compressor. Circulate in the cooling medium. Check and add cooling water every 2 years.
(3) Automatically heating control of distillation over, the sample can be heated to 95% of the flow rate from initial boiling point controlled within 4~5ml per minute.
(4) Provide initial boiling point and final boiling point temperature, and various percentage temperature and flow rate.
(5) Automatically measuring of local atmospheric pressure, and corrected to standard atmospheric pressure.
(6) Stopping of test by the steam temperature available.
(7) The test result can be stored, queried and printed.
This simulated distillation device consists of automatic bath/distillation temperature control system, refrigeration system, automatic level tracking system, security system and other components. The instrument adopts multi-thread operation and control, to achieve automated operation, control, computing and display, improving intelligent and automatic measuring. This instrument adopts fuzzy temperature control principle. A freon compressor is used in the refrigeration equipment for temperature control for precise control of condenser and receive chamber temperature. The temperature measurement system adopts high-precision heat resistance for precise measuring of steam temperature. This instrument adopts imported high-precision level tracking system for precise measuring of distillation volume with accuracy of 0.1ml.
In order to facilitate human-machine interaction, the system adopts true color touch screen, the user can set parameters via the touch screen, realizing real-time monitoring of operating parameters, recording critical temperature, tracing temperature-volume curve, storing 256 groups of test data, and querying of history data of various oil.
This instrument complies with GB/T6536-2010. The user can enable/disenable automatic pressure calibration. The system has built-in atmospheric pressure measuring device with high accuracy. In addition, the instrument is equipped with temperature, pressure, auxiliary equipment, fire extinguisher and level tracking equipment etc for automatic monitoring. In case of malfunction, the system will automatically prompt for immediate measures to prevent accidents.
1, Compact, beautiful, easy to operate.
2, Fuzzy temperature control, high precision, fast response.
3, 10.4” large color touch screen, easy to use.
4, High level tracking accuracy.
5, Automatic distillation process and monitoring.
|
Power |
AC220V±10% 50Hz |
|||
|
Heating power |
2KW |
|||
|
Cooling power |
0.5KW |
|||
|
Steam temperature |
0-400℃ |
|||
|
Oven temperature |
0-500℃ |
|||
|
Refrigeration temperature |
0-60℃ |
|||
|
Refrigeration accuracy |
±1℃ |
|||
|
Temperature measurement accuracy |
±0.1℃ |
|||
|
Volume accuracy |
±0.1ml |
|||
|
Fire alarm |
extinguish by nitrogen (prepared by customer) |
|||
|
Sample state |
suitable for natural gasoline (stable light hydrocarbon), motor gasoline, aviation gasoline, jet fuel, special boiling point solvent, naphtha, mineral spirits, kerosene, diesel fuel, gas oil, distillate fuels. |
|||
|
Indoor working environment |
temperature |
10-38°C(recommend: 10-28℃) |
humidity |
≤70%. |
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
