TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Product Selling Point Introduction
- 1、The multi cup design is suitable for testing the acid value of transformer oil and steam turbine oil.
2、It automatically completes the operation of extractant addition, neutralization titration and endpoint discrimination, acid value calculation, data storage and printout.
3、It is not necessary to prepare self extracting liquid and neutralizing liquid, etc. the average test time of oil sample is about 2 minutes.
4、The resistive touch screen is bright and elegant with accurate input parameters and stable and reliable performance.
5、Power off storage function, which can store the latest 100 test results;
6、The automatic calibration function of the standard acid can eliminate the system error and guarantee the accuracy of the determination result.
7、Large capacity and high efficiency carbon dioxide and water purification system ensures the stability of neutralization liquid concentration.
8、The design of the chassis is simple and reasonable, the size is small and exquisite, the appearance is elegant and generous.
9、Equipped with USB and wireless transmission interface, easy to connect with computer.
Product Parameters
|
Name |
Indicators |
|
Range of acid value |
0.001～1mg KOH/g |
|
Minimum resolution |
0.001 mg KOH/g |
|
Indicator repeatability |
0.002 mg KOH/g |
|
Supply voltage |
AC 220 V ±10% |
|
Power frequency |
50 Hz ±2% |
|
Applicable temperature |
0～45℃ |
|
Applicable humidity |
＜85 % RH |
|
Width * height * depth |
420×190×340mm |
|
Weight |
～9 kg |
Video
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
