TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Product Parameters
|
1、Switch of power supply |
5、Outlet port of air |
|
2、Pressure indicator |
6、Outlet port of air |
|
3、Pressure stabilizing valve |
7、Flow limiting valve |
|
4、Water release pipe |
8、Cable of power supply |
|
9、 Filter (activated charcoal) |
12、Air storage tank |
|
10、Changeover electromagnetic valve |
13、Pressure controller |
|
11、Air Compressor |
14、Filter (activated charcoal) |
Main technical parameter
|
Output flow |
0-2000ml/min (under the state of 0.4Mpa) |
|
Output pressure |
0-0.4Mpa |
|
Pressure stability |
＜0.003Mpa |
|
Working noise |
＜35db(A) |
|
Working environment |
0-45℃ |
|
Relative humidity |
＜85% |
|
Power supply |
220V±10%V,50Hz |
|
Consumed power |
150W |
|
Outer dimension |
420mm×260mm×350mm |
|
Net weight |
20Kg |
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
