TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Product Selling Point Introduction
- 1.Sampling digital three-phase inverter test power supply, no harmonic content, voltage easy to adjust, start, stop to eliminate the AC220V or sampling generator power supply impact.
2. Three-phase test power supply, improve the test speed, can identify the transformer wiring group 0-11.
3. Applicable to a wide variety of transformers, with a z-shaped connection transformer test function.
4. After one input of rated parameters, transformer transformer ratio, error value and tap tap location can be automatically measured. For tap switches with asymmetric tap switches, the exact position of the tap switch can also be accurately measured. Tap switches with up to 197 tap points can be measured.
5.Protection function is perfect, with high and low voltage reverse connection protection, transformer between turns short circuit protection, output short circuit protection, increase the stability of the use of the instrument.
6 .Adopt 7 inches 65K color touch screen liquid crystal, imitate mobile phone to change liquid crystal display way, operate simply and quickly.
7. The instrument has power clock and data storage, which is convenient for viewing historical data.
8. The instrument has both print output and U disk interface, and also can be equipped with RS232 interface, which is convenient for paperless office.
9. Adopt cold and temperature resistant, sealed and waterproof, anti-fall and shockproof multi-functional engineering plastic box, which is convenient for field test.
Product Parameter
|
Rating |
0.9～10000 |
|
Accuracy |
0.1%(below500) |
|
|
0.2%(501-2000) |
|
|
0.3%(2001-6000) |
|
Resolution |
Minimum is 0.0001 |
|
Working power supply |
AC220V±10% 50Hz |
|
Applied temperature |
-10℃～40℃ |
|
relative humidity |
≤85%, non-condensing |
Video
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
