TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Product Selling Point Introduction
- 1.Newly added accelerated dripping function, using electrode polarization voltage to automatically control the dripping speed, it only takes tens of seconds to measure a sample;
2.The newly added ammeter makes the titration process more intuitive;
3.The entire liquid path is made of special materials with excellent corrosion resistance, ensuring long-term continuous operation;
4.Use the electrode polarization voltage to judge and display the reaction end point and terminate the titration;
5.Fully closed system to avoid the infiltration of environmental moisture;
6.Using ordinary test (solvent) bottle caps as connectors for easy replacement;
7.Press the relevant function keys, and the instrument can realize: solvent inhalation, measurement, end point display (alarm), waste liquid discharge, and stirring;
8.PS-KF106V1 automatic fast Karl Fischer moisture analyzer adopts a special reagent bottle connector, which can use standard pyridine or pyridine-free reagents;
9.PS-KF106V1 automatic and fast Karl Fischer moisture analyzer adopts high-brightness digital tube and clear display;
10.Once the operation is incorrect, you can immediately interrupt and restart the operation;
11.Adopt a fully enclosed design piping system to avoid the escape of toxic gases, protect the environment and health, and the instrument runs smoothly and without noise;
Application objects:
Pharmaceuticals, organic chemicals, inorganic chemicals, petrochemicals, fertilizers, pesticides, dyes, coatings, food and beverages, surfactants, cosmetics, etc.
Product Parameters
1.Measurement range: 30ppm-100% (H2O mass fraction)
2.Resolution: 0.01ml
3.Moisture titration repeatability: ≤0.01
4.Linear correlation coefficient of water titration: ≥0.998
5.Capacity error≤±0.002
6.Instrument burette capacity: greater than 25ml
7.Sensitivity: 10-6A
Video
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
