English

PS-Vlfm 0.1Hz 80kV Ultra-Low Frequency High Voltage Generator

This product combines modern advanced digital frequency conversion technology and adopts microcomputer control. The voltage boost, voltage reduction, measurement and protection are fully automated, and manual intervention is possible during the automatic voltage boosting process. Because it is fully electronic, it is small in size and light in weight, has a large-screen LCD display, is clear and intuitive, and has a printer to output test reports.
DOWN LOAD TO PDF
Details
Tags
Product Selling Point Introduction

 

  1. 1,Current and voltage data are obtained directly through high-voltage side sampling, so the data is true and accurate.
  2. 2, Overvoltage protection: When the output exceeds the set voltage limit value, the instrument will shut down for protection, and the action time is less than 20ms.
  3. 3, Overcurrent protection: Designed as high and low voltage dual protection, the high voltage side can perform precise shutdown protection according to the set value; when the current on the low voltage side exceeds the rated current, shutdown protection will be performed, and the action time is less than 20ms.
  4. 4, The high-voltage output protection resistor is designed inside the booster, so there is no need to connect an external protection resistor.
  5. 5, Due to the adoption of high and low voltage closed-loop negative feedback control circuit, the output has no capacitance rise effect.

 

Product Parameter 

 

model

Rated voltage

Load capacity

Power fuse

weight

use

80KV ultra low frequency

80kV

(Peak)

0.1Hz,≤0.5µF

25A

Controller:6kg

Booster I:30kg

Booster II:50kg

Used for cables and generators up to 35KV

0.05Hz,≤1.0µF

0.02Hz,≤2.5µF

0.01Hz,≤5.0µF

Use alone
No.1 booster

30kV

(Peak)

0.1Hz,≤1.1µF

Used for cables and generators up to 10KV

0.05Hz,≤2.2µF

0.02Hz,≤5.5µF

0.01Hz,≤11.0µF

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Write your message here and send it to us
Related News
  • Differences between open cup flash point tester and closed cup flash point tester
    Differences between open cup flash point tester and closed cup flash point tester
    Flash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.
    Detail
  • The Reliable Load Tap Changer
    The Reliable Load Tap Changer
    When it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.
    Detail
  • The Essential Guide to Hipot Testers
    The Essential Guide to Hipot Testers
    When it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.
    Detail

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.