TEL:
+86-0312-3189593
English
Telephone:0312-3189593
Email:sales@oil-tester.com
Product Selling Point Introduction
- 1. Advanced technology: digital frequency conversion technology, microcomputer control, pressure rise, pressure reduction, measurement, protection, etc
2. The test process is fully automated.
3. Easy to operate: simple wiring, fool operation.
4. Comprehensive protection: multiple protection (over-voltage protection, over- current protection at high and low voltage sides), rapid action (when acting)
5. Room ≤10ms), the instrument is safe and reliable.
6. Safety and reliability: the controller is connected with the low voltage of the high voltage generator, with photoelectric control, safe and reliable use.
7. The high and low voltage closed-loop negative feedback control circuit is adopted, and the output has no capacity rise effect.
8. Complete configuration: capacitive touch screen, LCD Chinese character display, automatic storage, automatic printing.
9. Large test range: 0.1Hz, 0.05Hz and 0.02hz multi frequency selection, large test range.
10. Small volume and light weight: it is very convenient for outdoor operation.
Product Parameter
|
Mode |
Rated Voltage |
Load |
Fuse |
Weight |
|
40KV /1.1 |
40kv（peak value） |
0.1Hz,≤1.1µF |
8A |
Controller：6Kg |
|
0.05Hz,≤2.2µF |
||||
|
0.02Hz,≤5.5µF |
||||
|
50KV /1.1 |
50kv（peak value） |
0.1Hz,≤1.1µF |
10A |
Controller：6Kg |
|
0.05Hz,≤2.2µF |
||||
|
0.02Hz,≤5.5µF |
||||
|
80KV /1.1 |
80kv（peak value） |
0.1Hz,≤1.1µF |
20A |
Controller：4Kg |
|
0.05Hz,≤2.2µF |
||||
|
|
|
0.02Hz,≤5.5µF |
|
Video
Write your message here and send it to us
Related News
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
