English
-
● Dc high voltage generator adopts high frequency PWM technology to make closed adjustment with high voltage stability, small ripple factor and fast reliable protection circuit. The generator can endure direct discharge by devices of large capacitance. It is of small size and of light weight, convenient for field use.
● Full range of linear smoothly adjusted voltage, with voltage regulation accuracy smaller than 0.1%; voltage measurement accuracy is 0.5%, resolution 0.1kv; Current measurement accuracy is 0.5%, the minimum resolution: control box 1µA, shock resistance current 0.1µA.
● The generator uses AC 220 V power supply (AC220V±10%, 50 hz±1%), the ripple factor is less than 0.5%, and can be used for all-weather at the site.
● High voltage multiplier uses Dupont materials for full solid encapsulation, overcoming the inconvenience brought by the air and oil filled equipment. Broad base and outer cylinder of light quality makes it stand steadily and more convenient for maintenance.
● 75% MOA voltage switch button, simple and convenient testing arrester.
● Over-voltage setting function displays the over-voltage value during regulation process; perfect protection against discharge of over-voltage, over-current and short circuit. This is the best companion for cable experiments.
● Perfect break line and non-zero potential start protection function protects the operator and samples at any time. This product has overall design of shock-proof control box, concise, clear panel design and voice prompt for operation.
|
Voltage (KV)/ |
Control Box |
High-Voltage Unit |
|||
|
Rated Voltage |
Size (mm) |
Weight kg |
Size (mm) |
Weight kg |
|
|
60/2-5 |
60KV |
310 * 250 * 230 |
5kg |
470 * 260 * 220 |
6kg |
|
80/2-5 |
80KV |
310 * 250 * 230 |
6kg |
490*260*220 |
8kg |
|
100/2-5 |
100KV |
310 * 250 * 230 |
6kg |
550*260*220 |
8kg |
|
120/2-5 |
120KV |
310 * 250 * 230 |
7kg |
600 * 260 * 220 |
10kg |
|
200/2-5 |
200KV |
310 * 250 * 230 |
8kg |
1000 * 280 * 270 |
20kg |
|
300/2-5 |
300KV |
310 * 250 * 230 |
9kg |
1300 * 280 * 270 |
22kg |
|
350/2-5 |
350KV |
310 * 250 * 230 |
9kg |
1350 * 280 * 270 |
23kg |
|
output polarity |
Negative polarity, no-voltage start, linear continuous adjustment |
||||
|
working power supply |
50HZ AC220V±10% |
||||
|
voltage error |
0.5%±2，minimum solution 0.1KV |
||||
|
current error |
0.5%±2，minimum solution 0.1µA |
||||
|
ripple factor |
better than 0.5% |
||||
|
voltage stability |
Random fluctuation, when the grid changes ±10%, ≤0.5% |
||||
|
working manner |
Interval working, less than 30 minutes under rated load |
||||
|
working condition |
Temperature: 0-40℃, humidity: less than 90% |
||||
|
storage condition |
Temperature: -10℃～40℃, humidity: less than 90% |
||||
|
altitude |
Lower than 3000 m |
||||
-
Differences between open cup flash point tester and closed cup flash point testerFlash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The burning point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and the burning point are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.Detail -
The Reliable Load Tap ChangerWhen it comes to enhancing the efficiency and performance of transformers, a load tap changer transformer is essential.Detail -
The Essential Guide to Hipot TestersWhen it comes to ensuring electrical safety and compliance, a reliable hipot tester is indispensable.Detail
